Designed to be used when 2 independent heating circuits are needed for heating one large room. Programmable.
- 7 Day Programming
- Save Up to 28% On Heating Costs
- Dual Single Pole Design with 4 Wires
- Easy Dial Program Operation
- Snap Action Relays
- Shallow Design Allows More Wiring Room Inside Full Electrical Boxes
- 3 Minute Cycle Rate Reduces Temperature Swings
- Electronic Sensing With Thermistor For Accurate Temperature Control (±.9ºF)
- Battery Powered AA
- UL Listed for USA & Canada
- Imported to King Specifications
- 1 Year Limited Warranty
Available Models
Ordering Information
MODEL | UPC | TYPE | PACKAGING | WIRE LEADS | VOLTS | AMPS | TEMP. RANGE | Purchase |
---|---|---|---|---|---|---|---|---|
HP30 | 19068 | Electronic Line Voltage | Single Box | 4 Wire | 120/208/240 | 16 per pole | 40ºF-93ºF | Buy Now |
Engineering Specs
Temperature Range: 40°F – 93°F (4°-34°C)
Temperature Default: Programs Set Point
Display Format: LCD
Display Size: Large Format
Sample Rate: Every 60 seconds
Delay On: 1 second for relay 2
Heat Indicator: LCD “heater On”
Relay Rating: 16 Amps x (2) resistive or inductive
Relay: AA battery powered
Mounting: 2×4 electrical box
Accuracy: ± .9°F
Maximum Amps: 16 resistive or inductive
Maximum Watts per Pole:
7700 @ 240V
6656 @ 208V
3840 @ 120V
Minimum Watts: 0
Power Supply:
1 to 240 Volts AC
1 to 30 Volts DC
Installation: Leveling of the thermostat is not required. Mounting screws are provided. Mount the thermostat about five feet above the floor in an area with good air circulation. Avoid mounting the thermostat where it will be affected by drafts, air from ducts and radiant heat sources such as appliances, the sun or plumbing pipes. Typically the best location is above a light switch for that room.