Visual Guide to Cadet Z Series Replacement
The old heater needing to be replaced.
Turn off power at breaker. Take off grill and remove interior.
Remove ground screw and ring. Lift bottom panel to expose feet screws.
Tilt old can out after all screws have been removed.
Move wiring to left side.
Clean and trim wall opening.
Apply wiring to left side of wall can.
Insert can into wall.
Look how easy this is!
Attach can to stud on one side and use 3 1/2 screws for the other side.
Apply power wires and ground.
Insert interior into wall can.
Attach screw at top of can.
Apply grill and test. PAW2422
King heating products. There’s one in your future.