King Electric

Smart Heating Solutions

Smart Heating Solutions

Model SB

Home » Products » Commercial Electric Heaters » Draft Barriers » Model SB

Model SB

draft barrier heater

Convection heat becomes an architectural finishing touch in the sleek appearance and continuous look of this heater. An anodized aluminum finish is available (purchasing requirements may apply) with standard colors including white, gray, black, tan and bronze. Controls can be mounted conveniently in either end of the heater. Feed-through wiring is provided by a built-in wire-way
running the entire length of the heater. End caps are required on standalone installation. Residential version requires a slope top. If you need a heater suitable for architectural, commercial and/or industrial use, this is it.

  • Full Length Safety Cutout
  • 14 Gauge Front and Back
  • Two Piece All Aluminum Construction
  • Natural Convection Heat
  • Silent Running
  • Extended Backs & Fronts Available
  • 4” Junction-Boxes At Both Ends
  • ¾” EMT Raceway Standard
  • 5” H x 3” D Cabinet Size
  • Available in Gray, Almond, Bronze, White, & Semi-Gloss Black Finishes
  • Proudly Made in the USA with U.S. & Global Materials
  • 1-Year Limited Warranty

Protection From Low Insulated Glass Windows

Used for tall glass walls or complete heating of large commercial spaces. The sleek lines complement any commercial building.

Now That’s Smart!

Available Models

Ordering Information

STANDARD MODELUPCFRONT INTAKE MODELUPCVOLTS*WATTSLENGTHNOMINAL WATTS / FT.
SB2240414428SBF22404144642404002'200
SB2240514430SBF22405144662405002'250
SB3240614432SBF32406144682406003'200
SB3240714434SBF32407144702407503'250
SB4240814436SBF42408144722408004'200
SB4241014438SBF424101447424010004'250
SB5241014440SBF524101447624010005'200
SB5241214442SBF524121447824012505'250
SB6241214444SBF624121448024012006'200
SB6241514446SBF624151448224015006'250
SB7241414448SBF724141448424014007'200
SB7241714450SBF724171448624017507'250
SB8241614452SBF824161448824016008'200
SB8242014454SBF824201449024020008'250
SB9242014456SBF924201449224020009'200
SB9242214458SBF924221449424022509'250
SB10242014460SBF10242011496240200010'200
SB10242514462SBF10242514498240250010'250

Ordering Information - Accessories

MODELDESCRIPTION
SB-100BS1FT. Blank Section
SB-200BS2FT. Blank Section
SB-300BS3FT. Blank Section
SB-400BS4FT. Blank Section
SB-500BS5FT. Blank Section
SB-600BS6FT. Blank Section
SB-700BS7FT. Blank Section
SB-800BS8FT. Blank Section
SB-900BS9FT. Blank Section
SB1000BS10FT. Blank Section

Ordering Information - Control Sections

MODELDESCRIPTION
SBCS-TSThermostat Section - SPST, 20 Amp, 277 Volts
SBCS-TSDSThermostat Disconnect Switch Section, 20 Amp
SBCS-TSRThermostat Relay Switch, 20 Amp
SBCS-TSDSRThermostat Disconnect Switch, Relay Section, 20 Amp
SBCS-DSDisconnect Switch, Section, 20 Amp
SBCS-RRelay Section - SPST, 20 Amp, 277 Volt
SBCS-RDSRelay, Disconnect Switch Section, 20 Amp
SBCS-TRXformer Relay Section - SPST, 25 Amp, 277 V, 24V Control
SBCS-TRDSTransformer Relay, Disconnect Switch Section, 20 Amp
SBCS-PEPE Relay, SPST, 20 Amp
SBCS-DS-FUSEDDisconnect Switch, with 20 Amp fuse and fuse block

Ordering Information - Options

MODELDESCRIPTION
SB-ICInside Corner
SB-OCOutside Corner
SB-ECREQUIRED End Cap (Specify right or left) 1/2"
SB-SPSplice Plate
SB-WTWall Trim
SB-MESH1/4" Wire mesh under discharge grille
SB-PD-FMPedestals (field mounting)

Ordering Information - Integral Controls

MODELDESCRIPTION
ITSIntegral Stat 25 Amp, SPST-120-277 Volts - STD-LF or RT
ITDIntegral Stat 20 Amp, DPST-208-240 Volts - STD-LF or RT
IDSIntegral Disconnect Switch 20 Amp, 120-277 V - STD-RT side

Engineering Specs

• Model SB Architectural Draft Barriers shall be 5″ H and 3″ D. The front cover shall be 14 gauge extruded aluminum construction suitable for architectural, commercial and industrial use with 1⁄4″ pencil-proof intake and discharge grilles. The one-piece cover shall be extruded for maximum strength and shall be available in lengths up to 12 feet.

• The cover shall be linear mount to the 14 gauge heater back with no visible fasteners. The 14 gauge heater back shall be suitable for mullion-to-mullion mounting.

• Standard painted finishes or optional anodizing shall be provided as specified by the architect. Color matching to architect’s specifications are available as optional finishes.

• Heat sections from 2 – 10 feet are available. All heaters shall contain 3⁄4″ EMT built-in raceway with factory wiring to provide field wiring from either end when optional controls are not included.

• 1⁄2″ and 3⁄4″ knockouts shall be provided in the side and rear of the heater junction-box to permit end-to-end wiring.

• All blank sections shall be fully enclosed to allow branch circuit wiring. All heaters shall contain a full length thermal overheat protector with automatic reset. Wattages shall be available from 100 to 250 Watts per foot. Heating elements shall be tubular stainless steel or aluminum tubing with aluminum fins mechanically bonded to ensure efficient heat transfer.

• Element fin temperature shall not exceed 350°F to ensure long element life. Elements shall be center anchored and free-floating in nylon bushings at each end.

• Control sections are 6″ or 12″ for pneumatic relay, transformer relay, fused disconnect or duplex receptacle. Optional built-in heater controls shall include thermostats (single and double pole) and disconnect switches.

• Built-in controls shall be tamper-proof and shall be adjustable with a blade screwdriver through the discharge louver.

• All heaters are Underwriters Laboratories listed

• Tested under UL Safety Standard UL#1042