The USG-4000 is a 15 A slave relay with built-in Class A GFCI that has been designed for use with UDG-4999 thermostats in floor heating applications that exceed 15 amps. Offering simple control of a room’s floor heat temperature. Links with UDG-4999 to provide single control of large heated floor area when load exceeds 15 amps.
- Dual Voltage – 120V or 240V
- Rated for 15 Amps @ 120, 208, 240 Volt
- Built-In GFCI and Floor Sensor Included
- System On/Standby switch
- Links with UDG-4999 To Connect Multiple Slave Relays Per Master
- cULus Certified for US and Canada markets
- Imported to King Specifications
- 3-Year Limited Warranty
Wet Floors. No Problem.
The built-in Ground Fault Circuit Interrupt (GFCI) provides worry-free operation, even in wet environments.
Now That’s Smart!
Large Space With Multiple Heaters. No Problem. Expand With Relays.
UDG-499 Thermostats are compatible with USG-4000 relays to extend the heating zone beyond 15 Amp and control all from one master location.
Now That’s Smart!
Downloads
Related Products
Model TCM
- 240 volt
- 12 to 14 watts/sq. ft.
- Length: 8.3 to 170 ft.
TC Series Cable offers a custom layout solution to in-concrete thermal storage, that can be installed to fit any individual application.
Model USG-4000
- 120, 208, 240 volt, 15 amps
- GFCI 5 milliamp
- For Thermal Storage Heating Cable
Links with UDG-4999 to provide single control of large heated floor area when load exceeds 15 amps.
Model TC
- 240 volt
- 6 watts/sq. ft.
- Length: 60 to 680 ft.
TC Series Cable offers a custom layout solution to in-concrete thermal storage, that can be installed to fit any individual application.
Model FCS11
- Attatch up to 3 cables or mats
- Alerts when heating cable is cut
- or damaged during install
Alerts the installer if continuity in the heating wire is broken by cutting the wire or if there is a short circuit between ground & heating wires.