The ES Max 22 Non-programmable thermostats offers “Best In Class” 22Amp Max Rating for larger heating circuits. Use where high accuracy is desired, and programmability is not needed. With a large back-lit display, this line voltage thermostat offers one of-a-kind in features including a memory backup for power outages. All the features you want with only two buttons. Simple has always been better. Two keys on the front control the temperature up and down. With comfort color back lighting and an on/off switch to control the illumination and system. Comfort color back light display is blue at 65ºF and red at 75ºF and varies in color between making it quick and easy to know your temperature. The illuminated LCD display can be read across the room making it easy to see at night. Simple, accurate control is the goal of the ES model. No fancy programming, just dependable temperature control for your home, saving money on your heating bills.
- "Best In Class" 22AMP Max Rating
- Simple Up & Down Temperature Selection
- ES Saves Up To 15% On Your Heating Costs
- 3-Wire Installation
- LCD Display of Room Temperature
- Red LED Heater ON Indicator
- Comfort Color Back light Display (Red at 75ºF / Blue at 65ºF)
- Electronic Temperature Sensing is The Most Accurate Technology
- 3 Minute Cycle Rate Reduces Temperature Swings & Increases Comfort At All Control Settings
- Complies With All Codes Requiring Anticipated or Electronic Thermostats
- Single Pole Design With Third Wire to Power Display
- Shallow Design Allows More Wiring Room Inside Full Electrical Boxes
- Available in 208/240V
- Electronic Sensing With Thermistor For Accurate Temperature Control (±1.2ºF)
- System On/Off Switch
- cULus Certified For USA and Canada
- Imported to King Specifications
- 1-Year Limited Warranty
Simple Has Always Been Better.
With simply 2 buttons control for temperature up and down and comfort color back lighting and an on/off switch to control the illumination and system. Comfort color back light display is blue at 65ºF and red at 75ºF and varies in color between making it quick and easy to know your temperature.
Now That’s Smart!
Engineering Specs
Temperature Range: 40°F – 95°F (4°-35°C)
Temperature Default: Your saved setting
Display Format: LCD
Illumination: Blue/Red LED
Sample Rate: Every 60 seconds
Room Temp. Display: Large LCD
Delay: 3 minutes on or off
Accuracy: NEMA TEST 1.5°F @ 22 Amps, 1.4°F @ 16 Amps, 1.2°F @ 10 Amps, 0.9°F @ 4.2 Amps
Power Source: 208/240 VAC (ES230), 50 – 60Hz
Battery Backup
• 22 Amps at 240V, 5280 Watts
• 22 Amps at 208V, 4576 Watts
• Wire leads #12 AWG
• 40°F to 95°F set point range
• Electronically anticipated
• 208/240V models only
• Digital thermometer/set point
• Meets energy requirements
• Three wire installation
• Snap action relay built-in
• 30 Amp relay
• 3 min. delay between cycles
• For use on all types of electric heaters, fan-forced, baseboard, radiant, etc.
• Single button operation
• Thermistor sensor
• Contemporary styling
• LCD display
• 1.5 degrees maximum
• 3/4″ depth into wire box
• On/Off switch for back light
• On/Off switch for system
Related Products
MODEL K702E-2 SIMPLSTAT
- 120, 208, 240 volts / 16 amps
- range: 41°F to 95°F (5°C to 35°C)
No programming needed. 3 personalized presets. Oversized buttons.
MODEL K302PE
- touch sensitive buttons
- 120, 208, 240 volt 15 Amp
Providing highly accurate temperature control of line voltage electric heaters. Compatible with the K312RELAY for heating applications exceeding 15A.
MODEL K322E
- touch sensitive buttons
- 120, 208, 240 volt 15 Amp
Providing highly accurate temperature control of line voltage electric heaters. Compatible with the K312RELAY for heating applications exceeding 15A.
MODEL K312RELAY
- Up to 10 relays per master
- receives signal sent by K302PE & K322E
Links with K302PE & K322E to provide single control of larger heated areas when load exceeds 15A. Receives signal sent by master thermostat & activates heat when required.