The SRK18 is an above-insulation, lighted end seal kit with a light that indicates voltage at the end of the circuit. It is designed for use with the SR industrial parallel heating cable. It is approved by CSA for use in hazardous locations. The SRK18 is mounted on the pipe and projects through the thermal insulation and cladding for ease of maintenance. Once installed, the end seal is easily reentered for maintenance and the heating cable can be accessed without removing the end seal. The LED indicator light provides excellent visibility.
This kit may be installed at temperatures as low as -40°F (-40°C). For easier installation store above freezing until just before installation.
Make sure the voltage rating of light is the same as that of the heating circuit.
- Lighted end termination for SR pipe trace cable
- Rated For Hazardous Locations Class I, Div. 2, Groups A,B,C,D Class II, Div. 2, Groups E,F,G Class III
- For use with SR-CT cables
- With LED indicator light for visibility
- May be installed at temperatures as low as -40°F (-40°C)
- Heating cable can be accessed without removing the end seal for maintenance
- Rated for 85 to 277 VAC
|SRK00||40462||Hard wired power connection kit, includes end seal||0.3 lbs.|
|SRK02||40461||Connection kit, includes end seal||0.3 lbs.|
|SRK03||40464||Pipe trace tape (66 ft.) and 10 labels per pack||0.3 lbs.|
|SRK04||61713||2.5" x 50 yards 2 Mil foil tape||0.3 lbs.|
|SRK08||40466||Plug in 120V connection kit with GFEP device, includes end seal||1.0 lbs.|
|SRK10||40468||Weatherproof splice/tee kit, includes end seal||0.2 lbs.|
|SRK12||40470||End seal kit (2 per package)||0.1 lbs.|
|SRK13||40472||Roof Clip (25 per package)||0.2 lbs.|
|SRK14||40473||3M VHB double sided acrylic foam pads (25 per package)||0.1 lbs.|
|SRK15||40476||Downspout hanger and cable ties||0.3 lbs.|
|SRK17||40477||11 & 13mm Gel end seal||0.1 lbs.|
|SRK18||40512||LIGHTED END SEAL, 85-277V||1.0 lbs.|
|CWRK-35||48732||19 Roof Clips & 16 Spacers||0.09 lbs.|