The EFW-LD heater was designed specifically for Assisted Living Facilities, Daycare Centers, Memory Care Centers, or any facility that has high risk occupants, where temperatures should not exceed 120 degrees. These facilities can benefit from replacing high density heaters, especially where required by code to keep their patients safe. Heaters can be ganged together to work on one thermostat if higher output is required.
- Low Density Heat Output
- Max Surface temp 120F
- Designed for Assisted Living Facilities, Daycare Centers, Memory Care Centers, or Any Facility With High-Risk Occupants
- Economical Design That Redefines Comfort
- NiChrome Open Coil Element For Quick Heat Transfer
- Patented Smart Limit Protection®
- Long Life Unit Bearing Motor
- Available in White
- Optional Built-In Thermostat Available
- Proudly Made in the USA with U.S. & Global Materials
- Available in 120, 208, 240 volts
- 1-Year Limited Warranty
Product Features
Safe Comfort for Assisted-Living Facilities With High Risk Patients
Designed specifically for for Assisted Living Facilities, Daycare Centers, Memory Care Centers, or any facility that has high risk occupants, where temperatures should not exceed 120 degrees.
Now That’s Smart!
Worry-Free Comfort For Your Loved Ones
EFW-LD heaters are protected by King’s patented Smart Limit Protection®, which disconnects elements and motor in the event normal operating temperatures are exceeded. If the unit trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes.
Now That’s Smart!
Available Models
Ordering Information
| MODEL | VOLTS | WATTS | MAX SURFACE TEMP | AMPS | SHIP WEIGHT lbs | Purchase |
|---|---|---|---|---|---|---|
| EFW1210-LD-W | 120 | 1000 | 120F | 8.3 | 16 | Buy Now |
| EFW2012-LD-W | 208 | 1200 | 120F | 5.7 | 16 | Buy Now |
| EFW2412-LD-W | 240/208* | 1200 | 120F | 4.9/4.3* | 16 | Buy Now |
Ordering Information - Accessories
| MODEL | UPC | DESCRIPTION | SHIP WEIGHT lbs | Purchase |
|---|---|---|---|---|
| UWIC | 12590 | Recessed Wall Can | 6.5 | Buy Now |
| UWSA | 12599 | Surface Can - White 3-3/4 Inch Deep | 7.5 | Buy Now |
| UWSA-A | 12595 | Surface Can - Almond | 7.5 | Buy Now |
| EFT-1 | 19445 | Single Pole 25 Amp Thermostat Kit | 0.5 | Buy Now |
| EFT-2 | 19448 | Double Pole 25 Amp Thermostat Kit | 0.5 | Buy Now |
| LPW-TPC | 18174 | Tamper-proof Cover for Controls 3-1/4 x 3-1/4 x 18-3/4 Inch | 1.5 | Buy Now |
| EFT-1-TP | 19480 | Single Pole Tamper-proof Integral Stat Kit | 0.5 | Buy Now |
| EFT-2-TP | 19481 | Double Pole Tamper-proof Integral Stat Kit | 0.5 | Buy Now |
Engineering Specs
Contractor shall supply and install EFW-LD Series in-wall mounted forced-air electric heaters manufactured by King Electrical Mfg. Company. Heaters shall be of the wattage and voltage as indicated on the plans.
Surface Temperature: *Not to exceed 120F based on 77F ambient.
Motor: Heavy-duty cast aluminum 4 pole unit bearing, permanently lubricated with 10cc oil reservoir, 1440 RPM. Enclosed impedance protected with intake air cooling motor for increased bearing life.
Fan: High efficiency, dynamically balanced 5-blade aluminum fan. 185 CFM.
Heating Low Density Elements: Element assemblies shall be constructed of coiled Nickel Chromium alloy, corrosion-resistant wire strung
through a minimum of four rows of mica insulator.
Thermal Overload: Heaters shall be equipped with King’s patented thermal overload Smart Limit Protection®, which disconnects elements and motor in the event normal operating temperatures are exceeded. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes.
Wall-box: 20 gauge electro-galvanized steel with factory installed ground-wire. Minimum 4”clearance to floors and 6” to sidewalls. Zero clearance to insulation in the wall. Recommended 10” clearance to floors and 16” to sidewalls.
Grill: 20 gauge steel finished in a gloss white, powder-coated paint. Optional Almond color.
Options: 1-Pole or 2-Pole built-in thermostat 45-80°F operating range, retrofit grill, and surface wall-box.
Approvals: cCSAus
Related Products
MODEL LPW ECO2S®
- 120, 208, 240 volt / 1250 to 4500 watts
- Remote Temperature Sensing
The LPW ECO2S simply works smarter not harder, with the ECO2S 2-stage electronic thermostat and remote temperature sensing. With the ECO2S, your heater knows exactly where your room's cold spot is and works smarter to keep the entire room comfortable, while using the least amount of energy needed to heat the space.
MODEL LPW COMFORTCRAFT
- 120, 208, 240 volt
- 1250 to 4500 watts
Our most popular large wall heater REFINED. Residential or commercial use. Efficient, fan-driven heater with a high quality built-in thermostat.
MODEL PX ECO2S®
- 120, 208, 240 volt / 750 to 1750 watts
- Remote Temperature Sensing
The PX ECO2S simply works smarter not harder, with the ECO2S 2-stage electronic thermostat and remote temperature sensing. With the ECO2S, your heater knows exactly where your room's cold spot is and works smarter to keep the entire room comfortable, while using the least amount of energy needed to heat the space.
MODEL PX COMFORTCRAFT
- 120, 208, 240 volt
- 250 to 1750 watts
King redefines comfort by combining a modern architectural design with the original multi-wattage steel fin element that transfers heat quietly and efficiently.